
Chapter 2: Wireless Gateway Interfaces
Figure 5: Wireless Gateway interfaces
Push-button
The Wireless Gateway is equipped with a configuration push-button, which is used for:
Accessing troubleshooting mode. Refer to
Enabling a mobile device (for example: smart phone, tablet) to access a web page
for maintenance.
Factory reset
The push button is illuminated by LEDs. The LED indications are summarized in the next
section. The following sections describe the push-button functionality.
LED Indications
The following table describes the LED color indications for the Wireless Gateway or
Repeater:
Color
Status
Indication
Red
OFF
No power
ON
General error
Blinking
During factory reset
Blue
ON
Communication between the Wireless Gateway or
Repeater and the monitoring platform is OK
Blinking
No communication between the Wireless
Gateway/Repeater and the downlink Repeater/ inverter
Chapter 2: Wireless Gateway Interfaces
9
Wireless Gateway and Wireless Repeater Installation Guide MAN-01-00559-1.5
Summary of Contents for WIFI-GW
Page 29: ......