Solar Stik G-BOSS E LIGHT Operation And Maintenance Manual Download Page 46

Page: 46 / 93

December 2020

Solar Stik

, Inc.

System Setup and Operation Manual for the Solar Stik G-BOSS E Light HPS

PRELIMINARY

k Connect PV Array(s) to PRO-Verter (Optional)

Solar “Y” Cable

Figure 38. PV array to PRO-Verter connection

Figure 39. PRO-Verter Power specifications for PV arrays

PV arrays, other than the ones provided in the kit, can be connected to the PRO-Verter as long as
the power specifications for the arrays do not exceed the specifications listed on the Faceplate.

*System PV arrays: General Rules and Requirements

Connect the PV array(s)/Solar Cable to the PRO-Verter Solar Only port on the front of the PRO-
Verter.

Note

: PV arrays up to 880 W can be connected to the PRO-Verter*.

PV Arrays

Summary of Contents for G-BOSS E LIGHT






























































































Search results

Summary of Contents for G-BOSS E LIGHT

Reviews:

Related manuals for G-BOSS E LIGHT

Brands by name

Popular brands

Solar Stik G-BOSS E LIGHT, Operation And Maintenance Manual

Search results

Summary of Contents for G-BOSS E LIGHT

Reviews:

Related manuals for G-BOSS E LIGHT

Brands by name

Popular brands