Solar Stik 21-0202317, Operator And Maintenance Manual

Page: 23 / 37

| 23 April 2022 | Solar Stik® Inc.
Operator and Maintenance Manual for the 24VDC Li ESM 2000
Activate ESM(s): Operational Mode
Remove safety/cotter pin and toggle POWER switch to ON. Over the course of ~ one (1) min. several
startup tests (PBIT) results will be displayed (Figure 14) before the Status Indicator displays the
Operational-Mode screen (Figure 13). Check the voltage and SOC. Repeat for each battery. Ensure
that each battery is in normal operating condition.
Figure 13. Activate ESM 2000
Safety pin
POWER switch
Battery Status Indicator Startup Screens
1. Firmware version and date
2. CAN bus auto-termination status.
3. CAN bus communication operational
4. Connecting to battery comms
5. Battery serial number
1.
2.
3.
3.
4.
4.
5.
5.
Screen 1
Screen 2
These two screens scroll by automatically before
the final status screen is populated (e.g., Figure
11). This is the location where the firmware
version is documented. For more information
on the firmware, contact Solar Stik Technical
Support.
Figure 14. Battery Ststus Indicator Startup Screens