manualshive.com logo in svg

Solar Stik 19-1000010, Operator And Maintenance Manual, Page: 7 / 27

Share
Download
Solar Stik 19-1000010 Operator And Maintenance Manual Download Page 7

 

 |

 7

October 2020

Solar Venture 300W PV Array Operator and Maintenance Manual

 

Electric Shock Hazard Related to PV Panels

 WARNING

Standing water around the electrical equipment and/or intrusion of water into the System 
components can increase the risk of electrical shock.

DON’T LET THIS BE YOU!

HIGH VOLTAGE: 

PV arrays and generators produce potentially lethal line voltages. When servicing 

equipment, extreme care should be taken to protect against electrocution. Always work with another 
person in case an emergency occurs. Disconnect power before checking controllers or performing 
maintenance. Be sure the generator is properly grounded. Wear safety glasses whenever working on 
any part of the System that requires exposure to mechanical or direct electrical contacts.

•  PV panels produce electricity when exposed to sunlight. 

•  Live power may be present at multiple terminals. 

•  Never route the cables through standing water. 

•  All cables and connections should remain dry and should be inspected regularly to ensure safe 

operating conditions.

Summary of Contents for 19-1000010




























Reviews:

No comments