Solar Stik 19-1000010 Operator And Maintenance Manual Download Page 21 | Manualshive

Page: 21 / 27

Solar Stik 19-1000010 Operator And Maintenance Manual Download Page 21

|

21

October 2020

Solar Venture 300W PV Array Operator and Maintenance Manual

Disassembling and Repacking the PV Array

Repacking the PV array is safe and simple when done correctly. Please follow the instructions below.
Failure to follow the instructions may result in damage to the PV array and difficulty fitting all of the
pieces back into the transport case.

• Disconnect the PV array from the Power Hub, Power Pak or PRO-Verter S.

• Carefully clean the surface of the PV array.

• Remove the PV array from the support stand.

• Fold the PV array as shown in Figure 15 A.

• Place the folded PV array into the transport case and cover it with the case foam.

• Remove the locking pins (deployed position) from the PV array support frame, collapse/fold the

support frame and return the locking pins to the storage position.

• Fasten the transport strap

• Place the support frame into the transport case on top of the case foam (Figure 15 B).

• Place the ground-securing mesh and the Solar Cable on the right and left sides of the interior

(Figure 15 C).

• The case lid should close without resistance when all components are stowed properly

Figure 15. Packing the Solar Venture 300W PV Array

A

B

C

«
...
19
20
21
22
23
...
»

Summary of Contents for 19-1000010




























Reviews:

No comments