Installation Instructions – Evolve Cabinets
5
Attaching slope tops to Evolve cabinets
For cabinets with roll-top doors
Step 1
•
Align the clips on the top of the cabinet and the bottom of the
slope top. Place the slope top on the cabinet. Make sure all
4 clips are engaged.
For cabinets with hinged doors
Step 1
•
Measure the distance from the front edge of the slope top to
the center support. See Step 1 figure.
Step 2
•
Place the slope top on the cabinet. See Step 2 figure.
Step 3
•
To determine screw placement to connect the slope top to the
cabinet, take these measurements and mark locations.
See Step 3 and 4 figure.
1: screw location from Step 1
2: measure 6" toward center from both the right and left side
of the cabinet
3: measure 1¼" from the back of the cabinet
Note: Recommend pre-drilling the marked screw locations.
Step 4
•
Attach the slope top to the cabinet from the inside of the cabinet
using 1¼" wood screws (total of 4 screws).
Questions? Call a Technical Services representative at 888-435-2256
6"
6"
1
1
4
"
MEASUREMENT
FROM STEP 1
SCREW PLACEMENT
STEP 1
STEP 2
STEP 3 AND 4
UNDERSIDE OF
THE CABINET TOP
6"
6"
1
1
4
"
MEASUREMENT
FROM STEP 1
SCREW PLACEMENT
STEP 1
STEP 2
STEP 3 AND 4
UNDERSIDE OF
THE CABINET TOP
6"
6"
1
1
4
"
MEASUREMENT
FROM STEP 1
SCREW PLACEMENT
STEP 1
STEP 2
STEP 3 AND 4
UNDERSIDE OF
THE CABINET TOP
Step 1
Step 2
Steps 3 and 4
Measurement
from step 1
Screw
placement
Center
support
S t o r a g e s o l u t i o n s f o r h e a l t h c a r e
