Operating Instructions and Installation Guide
Tri - System
_______________________
3DJH
2.4 Panel Installation
Collectors – attaching to roof
For Both Metal and Tiled Roofs
t
Locate the lower mounting rail a
minimum of 500mm distance from
the gutter, or greater if r oof allows.
Note: Ensure that the rail is
parallel with the gutter.
For Metal Roofs Only
t
mounting straps on both sides,
using rubber grommets to prevent
corrosion.
screws of 40mm length must
strap to the truss.
t
Ensure that the rail is parallel with the
gutter.
PP
RU
JUHDWHU
PP
RU
JUHDWHU
For Tiled Roofs Only
t
Carefully remove a roof tile and
locate the nearest roof truss.
t
stainless steel collector strap to the
mounting rail.
t
Shape the collector strap over the tile
and position over the roof truss.
screws of 40mm length must
strap to the truss.
t
Ensure collector strap is located on
truss vertically.
t
Repeat this process for the collector
strap at the other end of the
mounting rail.
t
Once the bottom rail has been
secured, the collector can now be
lifted on to the roof.
Note: Ensure this is done with
full consideration to OH&S
regulations. Care should be
taken.
&ROOHFWRU6WUDS
&ROOHFWRU6WUDS
8VHPLQLPXP
RIVFUHZV
_______________
Summary of Contents for SAWE-20-270
Page 10: ...3DJH _______________________...
