COMMISSIONING
35
6.
Press the MAX button to increase or the MIN button to decrease the preset outlet temperature setting.
Each press of the MAX or MIN button will increase or decrease the preset temperature by one
increment.
20 litre models
The MAX and MIN buttons are located above the DIP switches.
The increments are 55°C (1 flash), 60°C (2 flashes), 70°C (3 flashes).
27 litre models
The MAX and MIN buttons are located underneath the DIP 1 and DIP 2 set of DIP switches.
The increments are 38, 40, 42, 43, 45, 50, 55, 60, 70, 75.
MIN. BUTTON
MAX. BUTTON
ADJUSTER
BUTTON
DIP 1 SET OF
DIP SWITCHES
DIP SWITCH AND ADJUSTMENT BUTTONS
CONTINUOUS FLOW WATER HEATER
86,87 SERIES, 022,024,027 MODELS
1
2
3
4
O
F
F
ON
D
IP
1
1
2
3
4
ON
1
2
3
4
O
F
F
ON
D
IP
2
MIN
MAX
ADJ
1
2
3
4
ON
20 litre model
27 litre model
7.
Switch DIP SWITCHES 3 and 4 to the off (down) position.
The preset outlet temperature setting is now set.
20 litre model
– The red LED will go out.
27 litre model
– The temperature display will go blank.
8.
Switch off the electrical supply at the power outlet to the water heater.
9.
Refit the front panel and screws to the water heater.
dip
switches
max
button
min
button
DIP1
OFF ON
1 2 3
4
1
2
3
4
1
2
3
4
ON
ON
DIP2
OFF ON
1 2 3
4
1
2
3
4
ON
DIP1
OFF ON
1 2 3
4
DIP SWITCHES
PRESET OUTLET TEMPERATURE SETTINGS
CONTINUOUS FLOW FLOW WATER HEATER
86,87 SERIES, 022,024,027 MODELS
1
2
3
4
ON
DIP2
OFF ON
1 2 3
4
