SOLAC Yuna, Instructions For Use Manual

Page: 5 / 36

ESPAÑOL ES
ENGLISH EN
(Original instructions)
DESCRIPTION
A Handle
B On/Off switch
C Base
D Cable housing
E Water level sight
F Body
G Filter
H Lid
I Lid open button
USE AND CARE:
•
Do not switch the appliance on without water.
•
Do not use the appliance if the on/off switch
does not work.
•
Do not move the appliance while in use.
•
Use the appliance handle/s, to catch it or move it.
•
Respect the MAX and MIN levels.
•
Choose adequate sentence/s depeding of pro-
duct:
•
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
•
Store this appliance out of reach of children
and/or persons with physical, sensory or redu-
ced mental or lack of experience and knowle-
dge.
•
Do not store the appliance if it is still hot.
•
Only use water with the appliance.
•
The appliance is only intended for heating wa-
ter; as a consequence the appliance should
not be used for the cooking or heating of milk…
•
The use of bottled mineral water adapted for
human consumption is recommended.
•
Never leave the appliance unattended while in
use.
•
Never leave the appliance connected and una-
ttended if is not in use. This saves energy and
prolongs the life of the appliance.
•
Take care when handling recipients containing
liquids heated in this appliance as they may
boil fiercely.
•
CAUTION: Water condensation may appear
on the surfaces and objects around this
appliance.
INSTRUCTIONS FOR USE
BEFORE USE:
•
Remove the appliance’s protective film.
•
Before using the product for the first time it is
advisable to boil water within, so as to remove
all remaining dust and impurities.
FILLING WITH WATER:
•
You must fill the water compartment before tur-
ning on the appliance.
•
Extract the receptacle from its place.
•
Open the cover.
•
Open the lid by pressing the opening button.
•
Fill the receptacle taking care to observe the
MAX and MIN level (Fig.1).
•
Close the lid.
•
Put the container back onto its place.
USE:
•
Take the length of cable required out of the
housing.
•
Attach the appliance to its base / connector
making sure that it is correctly fitted into place.
•
Connect the appliance to the mains.
•
Turn the appliance on, by using the on/off
switch.
•
Once the water has boiled the appliance will
switch off automatically.
•
The appliance can be switched on again using
the switch once the control device has cooled,
if it is not switched on again, do not force it,
allow it to cool.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
•
Unplug the appliance from the mains.
•
Put the cable back in the cable housing.
•
The cable housing means you can remove and
have available the required length of cable for
working with the appliance, preventing acci-
dent risk situations.
•
Remove the water from the inside of the
appliance.
•
Clean the appliance.