Sola VESTA-2813 NS PLUS User Manual Download Page 37

Page: 37 / 80

- 37 -

6.3.3.1

INTERNAL KIT HOPPER - FERTILIZER
AND/OR MICROGRANULATE DISPENSER

This kit for conventional or microgranulate fertilizer has two

dispensers. These are adjusted by turning the hand wheel (1,

Fig. 6.41) until the indicator is in the position recommended

by the dosage table.

This dispenser can be set to the specific product to be dis-

pensed, using:

ROLLER FOR CONVENTIONAL FERTILIZER

(Fig. 6.42).

ROLLER FOR MICROGRANULATE FERTILIZER

(Fig. 6.43).

Fig. 6.41

Fig. 6.42

Fig. 6.43

FOR MODELS WITH MECHANICAL TRANSMIS-

SION AND A SINGLE DISTRIBUTION HEAD, IF

THE DOSE TO BE DISTRIBUTED IS LESS THAN

THAT SPECIFIED IN THE DOSAGE TABLES, ONE

DISPENSER SHOULD BE OVERRIDDEN. IN THIS

CASE, THE VALUE GIVEN IN THE TABLE SHOULD

BE DIVIDED BY 2.

IMPORTANT:

IT IS NOT POSSIBLE TO OVERRIDE

ANY DISPENSER FOR MODELS WITH ELECTRI-

CAL TRANSMISSION (ISOBUS).

IMPORTANT:

IF THE COULTER UNIT HAS TWO

DISTRIBUTION HEADS, IT WILL NOT BE POSSI-

BLE TO OVERRIDE ANY DISPENSERS. IN ADDI-

TION, BOTH DISPENSERS MUST BE SET TO THE

SAME VALUE.

For models with mechanical transmission. If you wish to

override a dispenser, follow these steps:

Fully close the dispensers by turning the hand wheel (1,

Fig. 6.41) until the indicator is in position 0.

Remove the connecting pin (2, Fig. 6.41).

To set the dose to a single dispenser, you must first divide

the dosage values given in the tables by 2 (see Section

9.3.1 INTERNAL KIT HOPPER WITH MECHANICAL TRANS-

MISSION) and set the position.

Summary of Contents for VESTA-2813 NS PLUS

















































































Search results

Summary of Contents for VESTA-2813 NS PLUS

Reviews:

Related manuals for VESTA-2813 NS PLUS

Brands by name

Popular brands

Sola VESTA-2813 NS PLUS, User Manual

Search results

Summary of Contents for VESTA-2813 NS PLUS

Reviews:

Related manuals for VESTA-2813 NS PLUS

Brands by name

Popular brands