- 26 -
5-
Once the central section has been set. Lower the depth
control wheels of the machine's folding parts until they
touch the ground, proceeding as specified in section
6.2.2 DEPTH CONTROL WHEELS. Observe the depth of
the machine's end coulters. If the coulters dig too deep
into the soil, lower the folding parts' wheels further to de-
crease the sowing depth. If the coulters do not penetrate
the soil, lower the folding parts' angle stop (see section
6.2.3 FOLDING PART TILT STOPS). Then travel 10 metres to
check the setting.
6-
Adjust the height-adjustable coulters (see section 6.2.4
COULTERS)
DEPENDING ON YOUR MACHINE MODEL. ONLY
IN EXTREME WORKING CONDITIONS WITH MA-
JOR LEVEL CHANGES, THE ADJUSTER CAN BE
MOUNTED IN THE SLIDE BRACKET SO THAT THE
COULTER UNIT CAN BE ADAPTED BETTER TO
THE TERRAIN (Fig. 6.3). ONCE THE WORK HAS
BEEN COMPLETED, THE ADJUSTER MUST BE RE-
FITTED IN THE USUAL HOLE FOR TRANSPORT-
ING THE MACHINE (FIG. 6.4).
TO ASSIST IN ADAPTING TO THE TERRAIN,
LEAVE THE HYDRAULIC CIRCUIT THAT FOLDS
THE COULTER UNIT IN THE NEUTRAL POSITION.
Fig. 6.3
Fig. 6.3
EXTRAORDINARY WORKING
EXTRAORDINARY WORKING
CONDITIONS
CONDITIONS
Fig. 6.4
Fig. 6.4
STANDARD WORKING
STANDARD WORKING
POSITION AND
POSITION AND TRANSPORT
TRANSPORT
IT IS ADVISABLE TO CARRY OUT A PRE-TEST BE-
FORE STARTING WORK. MOVE A FEW METRES
FORWARD AND CHECK WHETHER THE COUL-
TERS DIG PROPERLY INTO THE SOIL.
Summary of Contents for VESTA-2813 NS PLUS
