10
EN
4.5 ELECTROMAGNETIC COMPATIBILITY (EMC)
The electromagnetic compatibility is the ability of the product to function in an environment where
electromagnetic radiation and electrostatic discharge are present, without causing electromagnetic
interference to other devices.
4.5.1 Interference of other devices by Go! smart
Although the product meets the strict requirements of the relevant directives and standards, SOLA cannot
completely exclude the possibility of interference with other devices (for example, when using the product
in combination with third-party devices, such as field computers, personal computers, wireless devices,
mobile phones, certain cables or external batteries).
When using computers and radio equipment, make sure to observe to the vendor-specific
information about electromagnetic compatibility.
Only use original SOLA equipment and accessories.
4.5.2 Interference with the Go! smart by other devices
Although the product meets the strict requirements of the relevant directives and standards, SOLA cannot
entirely exclude the possibility that intense electromagnetic radiation in the immediate vicinity of radio
transmitters, two-way radios, diesel generators, etc. may distort the measurement results.
When performing measurements under these conditions, check the plausibility of the results.
4.6 FCC statement
WARNING:
The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. The following two conditions apply for operation:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE:
This device has passed the compliance test for limits for a digital class B device as per Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
