SOL paragliders LT 1 Manual Download

Page: 5 / 39

X Battens reinforce the profile.

With A – B row in all levels resuLT 1s in less

25% line consumption and line weight.

Our double „3D Shaping“ is a 3 dimension

shaping technology, which decreases the

imperfections and wrinkles at the leading edge,

resuLT 1ing in more aerodynamic performance.

Technology

Profiles between the cells of the trailing

edge, resuLT 1ing in better performance and

handling.

A new profile design to increase the wing

pressure, resuLT 1ing in form stability. More

performance along the whole speed range is

the resuLT 1.

Fabrics composed out of different materials

assure long life and more resistance with less

deformation and weight.

LDT are Load Distribution Tapes between the

suspension points for a weight distribution

along the whole wing during flight, resuLT 1ing

in better performance and stability.

Flexible nylon battens reinforcements.

High Tenacity fabrics; Vectran lines in gallery

and intermediate level results in a 22% better

induced drag compared to traditional covered

lines; Duralumin - and Inox Hardware.

Product developed and produced using

materials and processes that cause less impact

to the environment..

Higher Project Aspect Ratio

Cutting edge technology

laser equipments prepare

all molds and parts of the

canopy.

Summary of Contents for LT 1








































Search results

Summary of Contents for LT 1

Reviews:

Related manuals for LT 1

Brands by name

Popular brands

SOL paragliders LT 1, Manual

Search results

Summary of Contents for LT 1

Reviews:

Related manuals for LT 1

Brands by name

Popular brands