SPEED SYSTEM INSTALLATION
The necessary pulleys to adjust the
speed system are in the harness
itself. The cables must be initially
passed through the pulleys in front
of the seat.
RESERVE PARACHUTE COMPARTMENT
The reserve parachute compartment on your
harness was designed for most of the parachutes
in the market. In any case, you must install,
simulate and perform all testing, so that you
will not have any surprises in case you need
to activate it. Any questions concerning its
operation must be dealt with during the
intallation and setting of the harness before
the first flight.
Attention:
Never sit down in your harness for tests or other
activities when it is layed on the ground, this can
damage the harness, the rescue container and
the whole rescue system.
50
51
To make easy handle the foot
speed we suggest using the
m o d e l m a d e w i t h t h e
aluminum bar and steel cable.
FOOT STIRRUP INSTALLATION
Your harness has a
system that turns off
the Foot stirrup when
the inferior parachute
is set in. Pay much
a t t e n t i o n w h e n
installing it because
it is fundamental its
disconnection during
the opening.
The incorrect installation of the
foot stirrup may prevent the
reserve parachute opening.
Make sure that does not happen.
