Sokkia SHC5000, Owner'S Manual

Page: 23 / 68

Chapter 2 Standard Features
19
Audio Features
The SHC5000 has the following audio features (see The
Anatomy of the SHC5000 images for the locations of these
items):
„
Speaker - The speaker provides audible indicators
and program feedback. You can listen to mono audio
files and watch video. For stereo audio, use Bluetooth ,
headphones or HDMI output from the optional dock.
„
Microphone - Use the microphones to record audio notes
or add sound to a video when using the camera. Built in
microphones can also be used for Skype calls.
„
Audio Jack - The audio jack supports a stereo headset
or headset/microphone combination with 3.5 mm
connections.
Sleep, Reset, Hibernate, Power-Off, and Recovery
Putting the SHC5000 to Sleep
The SHC5000 goes to sleep after a few minutes by default.
When the SHC5000 is in a sleep state, it is still powered up,
but in a low power state.
1. To put the SHC5000 to sleep, press and release the
power key or go to the Start menu, select the Power
symbol, and select Sleep . Going into a sleep state can
take several seconds, depending on which activities the
SHC5000 is working on at the time. While it is going to
sleep, the red LED remains lit.
2. To wake the unit from a sleep state, press and release
the power key again. When it is awakened, the SHC5000
quickly resumes where it was before it was put to sleep.
3. You can change the sleep default setting by going to
the Start menu and selecting Settings > System > Power
and Sleep > Sleep .
Hibernating the SHC5000
The SHC5000 can be set up to hibernate, which powers
down the SHC5000. The state of the SHC5000 is saved to
a special file. When the SHC5000 is powered up, the unit
boots, sees the special file, and restores everything to the
state it was in before it hibernated. This is a safer choice