Sokkia iX-1001, Operator'S Manual, Page: 13 / 177

9
4. PRODUCT OUTLINE
Parts and functions of the instrument
1 Handle
2 Beam detector for Remote Controller
(Auto Tracking model only)
3 Wireless antenna
4 Instrument height mark

5 External interface hatch

"9. CONNECTING TO EXTERNAL DEVICES"
6 Battery cover
7 Circular level
8 Circular level adjusting screws
9 Tribrach locking screw
10 Luminance sensor
11 Objective lens (Includes "

Laser-pointer function")
12 Guide light

13 Attach/detaching slider/button
(Handle locking screw for Standard Handle)

"4.1 Parts of the Instrument Detaching/attaching the
RC Handle (Auto Tracking model)"

"4.1 Parts of the Instrument Detaching/attaching the
Standard Handle (Auto Pointing model)"
14 Sighting collimator

15 Tubular compass slot
16 Vertical Jog

17 Horizontal Jog

18 Power key
19 Speaker
20 Trigger key

21 Keyboard

"5.2 Display Functions"
22 Serial / External power source connector
23 Stylus (pen)
24 Levelling foot screw
25 Base plate
26 Tribrach clamp
27 Display unit
28 Optical plummet eyepiece
29 Optical plummet focussing ring
30 Telescope knob
31 Telescope eyepiece
32 Telescope eyepiece screw
33 Telescope focussing ring

Instrument height mark
The height of the instrument is as follows:
• 192.5mm (from tribrach mounting surface to this mark)
• 236mm (from tribrach plate to this mark)
"Instrument height" is input when setting instrument station data and is the height from the surveying point
(where the instrument is mounted) to this mark.

Laser-pointer function
A target can be sighted with a red laser beam in dark locations without the use of the telescope.
4.1 Parts of the Instrument
11
12
13
14
9 8
3
4
5
6
7
1
2
10
25
28
29
26
30
31
33
32
13
10
21
23
22
17
20
19
24
15
16
18
27