Sokkia CX-52, Operator'S Manual, Page: 100 / 284

16. SETTING-OUT ARC
92
3. Select “Define arc” in <Set-out
arc>.
• When [LOAD] is pressed,
registered coordinates can be
recalled and used.

"12.1 Entering Instrument
Station Data and Azimuth
Angle PROCEDURE Reading
in Registered Coordinate
Data"
4. Enter the arc From point data and
press [OK].
5. Press {

}/{

} to select
coordinates then press [OK].
To : Enter arc To point.
To/Center : Enter arc To point
and Center point.
To/Intersect : Enter arc To point
and Intersect point
(intersection of the
tangents).
Center : Enter arc Center
point.
Intersect : Enter arc Intersect
point.
Center/Intersect: Enter arc Center
point and Intersect
point (intersection
of the tangents).
6. Enter the coordinates specified in
step 5.
7. Press [OK] to proceed to arc
parameter input.
F r o m P t .
C
REC LOAD MEAS OK
S e t - o u t a r c
S e t - o u t a r c
S t n . O r i e n .
D e f i n e a r c
S e l e c t P t .
OK
T o
To P t .

REC LOAD MEAS OK