11
This user manual is a universal version for printer, can be applied to single printhead mode,
two printheads combined mode and two printheads separately mode, settings like below:
1. While using single printhead, settings refer to Section 5.4.3, Printing Options→A Nozzle
Maintenance →4) Printheads Selection: Printhead 1 or Printhead 2.
Note: while using build-in photocell, user can choose which one to use, the one on Printhead 1 or on
Printhead 2, settings refer to Section 5.4.3, Printing Options→D Build-in
Photocell Setting→ or ;
2. While using double printheads combined, settings refer to Section 5.4.3, Printing Options→A
Nozzle Maintenance→Printhead Selection: Double Printheads Combined.
Note: 1) While using build-in photocell, user can choose which one to use, the one on Printhead 1 or
on Printhead 2, settings refer to Section 5.4.3, Printing Options→D Build-in
Photocell Setting→ or ;
3. While using double printheads separately, settings refer to Section 5.4.3, Printing Options→A
Nozzle Maintenance→Printheads Selection: Double Printheads Separately.
Note: 1) While using build-in photocell, user can choose which one to use, the one on Printhead 1 or
on Printhead 2, settings refer to Section 5.4.3, Printing Options→D Build-in
Photocell Setting→ or ;
2) While using double printheads separately, Spit function and Purging function can be set
separately, steps refer to Section 5.4.3 Printing Options→A Nozzle Maintenance→
and
3) While using double printheads separately, Printing Direction and Channel Switch can be set
separately, steps refer to Section 5.4.3 Printing Options→A Printhead Setting
or .
