Soil Instruments Digital Inclinometer Pro User Manual Download Page 6

Page: 6 / 51

OVERVIEW & INTRODUCTION

Important information

The following symbols are used throughout the manual

PRODUCT

CHANGES

WARRANTY

DISPOSAL

Failure to observe the warning may result in injury, product

malfunction, unexpected readings, loss of data or damage to the

product that may invalidate its warranty.

Soil Instruments has an on-going policy of design review and reserves

the right to amend the design of their product and this instruction

manual without notice.

Refer to our terms and conditions of sale for warranty information.

The batteries are a consumable item and are excluded from

the warranty.

Products marked with the

symbol are subject to the following

disposal rules in European countries:

•

This product is designated for separate collection at an

appropriate collection point

•

Do not dispose of as household waste

•

For more information, contact Soil Instruments or the local

authority in charge of waste management.

WEE/DE3326WV

IMPORTANT

INFORMATION

QUESTION

WARNING

TIP

Tips give additional information that may be helpful when using the

Digital Inclinometer Pro.

WARNING

Summary of Contents for Digital Inclinometer Pro




















































Search results

Summary of Contents for Digital Inclinometer Pro

Reviews:

Related manuals for Digital Inclinometer Pro

Brands by name

Popular brands

Soil Instruments Digital Inclinometer Pro, User Manual

Search results

Summary of Contents for Digital Inclinometer Pro

Reviews:

Related manuals for Digital Inclinometer Pro

Brands by name

Popular brands