Soho BroadGuard NBG800 Page 14 User Manual Download | Manualshive

Page: 14 / 83

background image

6 SOHOware

®

Secure Cable/DSL Router

4. If you have a fixed public IP address, obtain the following information from

your ISP

•

The assigned Gateway IP address

•

Domain Name Server’s IP address

•

Subnet Mask

Making a Connection

All the connection ports are on the rear panel of the BroadGuard. Follow the steps
below to complete the hardware installation.

step1.

Connect to a cable/DSL modem - Two cables are supplied with the
SOHOware NBG800. The white cable (straight-through) is for
connecting a cable modem to the Cable/DSL port; the green one
(cross-over) is for connecting a DSL modem to the cable/DSL port.

Plug one end of the cable into the cable/DSL port of the BroadGuard
and the other end into the Ethernet port of the cable/DSL modem. If
the cable is connected correctly, the Cable/DSL LED will remain lit
(the cable/DSL modem must be turned on). If not, try switching the
cables, green for white

step2.

Connect to the PCs - Use a standard RJ-45 Ethernet cable (not
provided) to connect the Ethernet LAN adapters in the computers to
the BroadGuard LAN ports

step3.

Install the power adapter - Plug the power adapter into an AC power
outlet. Plug the other end into the BroadGuard. The Power LED
should light immediately

Note: Use only the power adapter supplied with the BroadGuard

Figure 4. Connecting the BroadGuard

Note: Only one PC should be connected to the BroadGuard during setting up

«
...
12
13
14
15
16
...
»

Summary of Contents for BroadGuard NBG800




















































































Reviews:

No comments

Related manuals for BroadGuard NBG800

Module NI PXI-8250

Brand: National Instruments Pages: 39

Brand: Tripp Lite Pages: 3

LinkStation 500

Brand: Buffalo Pages: 139

Brand: 8e6 Technologies Pages: 94

Brand: Thecus Pages: 130

Fibe-Air IP-10G

Brand: Ceragon Pages: 71

Brand: Enterasys Pages: 2

Brand: PairGain Pages: 76

VDA-NVR2108W4KS2

Brand: Dahua Technology Pages: 363

Brand: Orcomm Pages: 10

Brand: Korenix Pages: 3

Brand: Hirschmann Pages: 8

Brand: EnGenius Pages: 6

Brand: D-Link Pages: 32

DGS-1016D - Switch

Brand: D-Link Pages: 74

DGS-2208 - Desktop Switch

Brand: D-Link Pages: 37

DGL-4500 - GamerLounge Xtreme N Gaming Router Wireless

Brand: D-Link Pages: 2

Brand: D-Link Pages: 124

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands