After a Power Fail washing program
re
-starts without any delay
if temp. is less than 45 ̊ C
After a Power Fail washing program
wait 8” before re-starts program if temp. is equal or more than 45 ̊ C
5.9.
Opening and closing door or pressing start/pause
1.
During a
Delay Start
. At closing door or pressing S/P, program consumes the remaining time. The time in progress is
saved every 1’.
2.
During a
Drain + Fill
step. At the closing door or pressing S/P the program continues from the remaining.
3.
During a
Wash
step. At the closing door or pressing S/P, the program consumes the remaining time. The time in
progress is saved ev
ery 1’. Washing program re-starts after 8” if the measured temperature is equal or more than 45°C.
4.
During a
Heating
step. At the closing door or pressing S/P, the program continues heating up to the desired
temperature. The time out for the heating restart to the beginning (water could be cold again).
5.
During dry if the door is opened and re-closed,
the program continues.
5.10.
Modification of a program without pressuring S/P:
During the program if the user press any button (
without
pressuring of S/P), the program in progress continues and buzzer
warning sound is activated to show that is not a valid command.
Buzzer sound
“voice_4” will be activated to warn that is not a valid command.
5.11.
Modification of a program without Reset:
The program continues with the flow program but with the parameters (temperature, times) of the new program.
In heating step: If temperature is over than the new desired temperature cut off of heating step and go on with the next
step with new parameters.
If temperature is lower than the new desired temperature heat up water to the desired temperature level.
In washing step: If the washing duration is over than the new program washing duration cut off washing step and go on
with next step of new program.
If the washing duration is lower than the new program washing duration go on with washing step.
6
. OPTIONS
6
.1
Options & Model
Options & Models
Option
T41 / LCD_1
T42 / LCD_2
T42 / LCD_3
Delay Start
X
X
X
Half Load ( 3 modes )
X
X
X
Direct&Triple wash
X
X
X
Tablet
X
X
X
Prewash
X
X
X
Extra Fast
X
X
X
Extra Hygiene
X
X
X
Extra Silent
-
X
X
Extra Drying
-
X
X
NOTE: If the model has both direct and triple wash, it has not half load option.
6
.2
Compatibility between Options
Options
Delay Start
Half Load
( 3 modes
)or
Triple&Direc
t wash
Tablet
Child Lock
Extra
Fast
Extra
Hygiene
Extra
Silent
Extra
Drying
Delay Start
OK
OK
OK
OK
OK
OK
OK
Half Load ( 3 modes
)or Triple&Direct
wash
OK
OK
OK
OK
OK
OK
OK
28