25
Meddream VideoStation functionalities v4.6.1 Install Manual
Recording configuration, settings
Figure 34. Recording and video output options in the Recording profile Recording settings
In RECORDING window of the RECORDING PROFILE SETTINGS, you can view and modify the following options:
•
ENABLE RECORDING KEYS
– enable to control profile source recording with pedals (see pedal setup description
in General settings on page 17).
•
DICOM TRANSFER SYNTAX
– select the transfer syntax for DICOM file:
-
1.2.840.10008.1.2.4.100 and 1.2.840.10008.1.2.4.100 - MPEG2 video with strict combination options for
older medical devices.
-
1.2.840.10008.1.2.4.102 and 1.2.840.10008.1.2.4.101 - MPEG2 video for older medical devices.
-
1.2.840.10008.1.2.4.102 and 1.2.840.10008.1.2.4.102 - MPEG-4 video options for most of devices.
-
1.2.840.10008.1.2.4.102 and 1.2.840.10008.1.2.4.103 - MPEG-4 video with strict combination options.
NOTE!
It is important to select DICOM transfer syntax according hospital PACS. Some archives are very
old and do not support some of transfer syntax. Recommend to consult with administrator (see DICOM
archive conformance statement document).
•
MAXIMUM RECORDED VIDEO FILE SIZE (MB)
– enter the maximum allowed size for recorded video. The maximum
value according to DICOM standard is 4096Mb, but it may depend on PACS (how big files can be accepted) and
requires testing.
•
VIDEO/IMAGE SIZE
– select resolution.
CAUTION!
VS software will try to scale medical device output signal to match settings. It is recommended
to select close enough or the same resolution for medical device output signal to ensure best quality.
