manualshive.com logo in svg

Softing CableMaster, User Manual

Share
Download
Softing CableMaster User Manual Download Page 17

17

TESTING VIDEO CABLES

1. Connect the provided F-Connector coupler to the F-Connector at the top of the 

main tester (see Figure 6 below).

Figure 6. F-Connector on Main Tester

2. Screw one end of the video cable into the F-Connector coupler.

3. Secure a Coax remote to the opposite end of the video cable.

4. Press the VIDEO MODE button to start continuous testing. The following updates 

appear in the LCD display screen (see Figure 7):

•  The “Video” icon illuminates in the upper right corner.
•  A progression of “o’s” appear on the bottom of the display to indicate active 

testing.

•  The cable wiring structure displays (Pass, X-over, or Rev).
•  The “ID” icon appears with the Coax wire mapping remote number to its right.

Figure 7. Loop Testing in Video Mode

Note: The tests run until the O/ID button is pressed or when 5 minutes elapses with no 

change in the test results.

5. Trouble-shoot if cable faults (open or short) are detected.

8

Pass

Video

ID

Summary of Contents for CableMaster





























Reviews:

No comments

Brands by name

Popular brands

Load more brands