Softing CableMaster CM500, User Manual, Page: 11 / 24

11
If a split pair (Fig 5) is detected, those pin positions on the first and
second line will be flashing the pin numbers detected from the remote
and the “Split” icon will be flashing. If there are multiple errors to
display, there will be a combination of the above error will appear.
← Main Unit
← Remote
Figure 5 - Split Pairs
The ID icon (Fig 6) will have a number directly to the right of it,
indicating the remote ID number.
Figure 6 - Remote ID Number
Whenever the “TEL” or “DATA” icons are on, a new test is in progress .
In the coax mode, the “Open”, “Short” or “Pass” icon will be appear to
indicate the results of a test. If the cable passes, the “ID” icon will be
appear as well as a remote ID number on the bottom line of the display.
The “Coax” icon appears when a test is in progress.
The tone generator operates in DATA, COAX and VOICE modes. In
this mode, the conductors or pairs associated with one of the three
connectors are displayed.
The specific mode (DATA, COAX, VOICE or TONE) is selected by pressing
the MODE button. If the CableMaster 500 was off when the TONE
button is pressed, the last cable test mode used will be selected and
selected pairs are used.