Softel SFT3316, User Manual

Page: 25 / 25

SFT3316 16 in 1 IP QAM Modulator User Manual
23
SOFTEL. To prevent potential hazard, please strictly follow the operation conditions.
Prevention Measure

Installing the device at the place in which environment temperature between 0 to 45 °C

Making sure good ventilation for the heat-sink on the rear panel and other heat-sink bores if
necessary

Checking the input AC voltage within the power supply working range and the connection is
correct before switching on device

Checking the RF output level varies within tolerant range if it is necessary

Checking all signal cables have been properly connected

Frequently switching on/off device is prohibited; the interval between every switching on/off
must greater than 10 seconds.
Conditions need to unplug power cord

Power cord or socket damaged.

Any liquid flowed into device.

Any stuff causes circuit short

Device in damp environment

Device was suffered from physical damage

Longtime idle.

After switching on and restoring to factory setting, device still cannot work properly.

Maintenance needed
Chapter 6 Packing list

SFT3316 16 in 1 IP QAM Modulator 1 pc

User’s Manual 1 pc

Power Cord 1 pc