IDB-HC08AP User's Manual
Page 2
6. Eight jumpers to connect/disconnect each of the eight LEDs to/from
their respective Port D pins;
7. Eight high-efficiency (low-current) LEDs connected to Port D;
8. A push-button switch connected to RESET;
9. A push-button switch, together with a jumper to connect/disconnect it
to/from PTA6;
10. A potentiometer, together with a jumper to connect/disconnect it
to/from PTA7;
11. A 16-MHz oscillator, together with a jumper to connect/disconnect it
from the microcontroller’s OSC1 pin;
12. A connector for a 9-12 V, 200 mA (unregulated) power supply and an
auxiliary connector for a 5 V (max., regulated) power supply, together
with a jumper to select the power supply source;
13. A connector area to access the I/O pins of the microcontroller for
expansion prototyping;
14. A prototyping area.
1
2
3
4
5
10
8 9
11
12
13
14
6
7
The IDB-HC08AP Demo Board
Supported Devices
The IDB-HC08AP Evaluation Board supports the following devices:
MC68HC908AP16;
MC68HC908AP32;
MC68HC908AP64;
And any future MC68HC908AP family pin-to-pin compatible device.
Recommended Reading
Freescale MCU CD-ROM or individual datasheet;
Freescale CPU08 Central Processor Unit Reference Manual;
inDART-HC08 User’s Manual.
electronic components distributor
