SoftBank 940SC, User Manual

Page: 34 / 338

Getting Started
1
1-11
Charge Battery
・
If handset is on while Charger is connected,
battery indicator shows charge level, charging
as follows:
→ →
. flashes
when battery is fully charged. If handset is
off,
Charging
... appears while charging and
when battery is charged,
Battery full
appears.
External Light illuminates in red while charging.
・
An empty battery requires approximately 250
minutes to be charged with power off. Charging
time may vary depending upon the ambient
temperature.
AC Charger
a
Open Port Cover; w ith label down,
insert Charger Connector into
External Device Port
Note
・
Make sure Charger Connector is label side
down before inserting it .
Label Side
AC100V
Outlet
Port Cover
External Device Port
Charger Connector
Charger
b
Plug AC Charger into an AC 100V
outlet
c
When battery is charged,
disconnect handset, close Port
Cover, and unplug AC Charger
USB Charge
Connect handset to PC via USB Cable to charge
battery.
a
Open Port Cover; w ith label down,
insert USB Cable Connector
into External Device Port
Note
・
Make sure Charger Connector is label side
down before inserting it .
b
Insert USB Plug into PC USB port
c
When battery is charged,
disconnect handset, close Port
Cover, and remove USB Plug
・
USB charging takes longer; charging time
varies according to the PC. A weak battery
may not charge via USB.