SoftBank 705N, User Manual

Page: 92 / 320

3-14
3
E
n
te
ring Char
a
cter
s
A
Press
y
(CHARS.) to switch to Kanji/Hiragana
entry mode
B
Press a key to which a character is assigned
If you pressed a wrong key
Press
C
to delete the character
When the appropriate candidate does not appear
Press
l
to shorten the range, enter the reading directly, or
switch to
Fix Mode
.
C
Press
d
to move on to the area where the
prediction candidates are displayed and highlight
the candidate
In T9 Katakana entry mode
a
Use
s
to move the cursor on to the area where the
reading appears and select the reading
b
Use
j
to convert the reading to Kanji
D
Press
c
Tip
• Setting the character for conversion
Set the character for conversion to Kanji or Kana.
Press
M
(OPTIONS) and select
Settings
→
T9 Kana CHG mode/T9 Kanji
CHG mode
(default).
* Either one of
T9 Kana CHG mode
or
T9 Kanji CHG mode
(after
switched) appears depending on the current entry mode.
• Operations while entering
n
: Switch the character for conversion with the key, regardless of the setting
of T9 Kana CHG mode/T9 Kanji CHG mode .
d
: Press the key longer to display only the predicted candidates.
• Characters that are not fixed yet are displayed in gray in Fix mode.
Press
3
( さ column),
3
( さ
column),
#
(Dakuten) and
2
( か column)
The candidates appear
When the prediction function is set to
ON
, the previously entered words
appear in orange as the candidates.
_705N_manual_E.book 14 ページ ２００６年１２月２１日 木曜日 午後６時１８分