SOFAR 3K~6KTLM-G3
User manual
Copyright © Shenzhen SOFAR SOLAR Co., Ltd
- 17 -
Step 1
Open the packaging, insert hands into the slots on both sides of the
inverter and hold the handles, as shown in Figure 3-3 and Figure 3-4.
Figure 3-3 Moving the inverter (1)
Figure 3-4 Moving the inverter (2)
Step 2
Lift the SOFAR 3K~6KTLM-G3 from the packing case and move it
to the installation position.
To prevent device damage and personal injury, keep balance when
moving the inverter because the inverter is heavy.
Do not put the inverter with its wiring terminals contacting the
floor because the power ports and signal ports are not designed to
support the weight of the inverter. Place the inverter horizontally.
When placing the inverter on the floor, put foam or paper under the
inverter to protect its shell.
Attention
3.6. Installing SOFAR 3K~6KTLM-G3
Step 1
Determine the positions for drilling holes, ensure the hole positions
are level, then mark the hole positions using a marker pen, use the hammer drill
to drill holes on the wall. Keep the hammer drill perpendicular to the wall, do
not shake when drilling, so as not to damage the wall. If the error of the hole
