Soehnle AIRFRESH CLEAN CONNECT 500, User Manual, Page: 13 / 138

11
to the water or another liquid, even if the de-
vice is no longer connected to the power out-
let at that time. Risk of electric shock in case
of moisture when the device is reconnected
to the power outlet. Use a dry cloth to wipe
moisture off. Do not touch the power plug or
device with wet hands.
Attention!
• If the power outlet used to operate the Air-
fresh Clean Connect 500 is not properly con-
nected, the power plug of the device will get
hot. Ensure that you are using a properly con-
nected power outlet for the device.
• Do not place any objects on top of the Air-
fresh Clean Connect 500 and do not sit on it.
• Use only the original filter by Soehnle, which
is specifically suited for this Airfresh Clean
Connect 500.
• Do not use the Airfresh Clean Connect 500 af-
ter using incense for insect protection or in
places with oil residue or chemical vapours or
where incense sticks are burnt.
• Do not use the Airfresh Clean Connect 500 near
heaters, fireplaces, or gas-powered devices.
• Do not stand on the device.
2. Scope of delivery
1 Soehnle Airfresh Clean Connect 500
1 Soehnle combination filter for Airfresh Clean
Connect 500
1 Operating manual
3. Device description
A
: Control console
B
: Cover and air outlet
C
: Housing and air inlet
D
: UV-C lamp
E
: Combination filter (68107)
F
: Removable housing base
G
: Screw cap
4. Intended use
The Airfresh Clean Connect 500 is intended ex-
clusively for cleaning room air.
5. Air cleaning
With the Soehnle combination filter you can re-
move a multitude of unwanted particles and
odours from your room air. Micro-organisms and
viruses are destroyed by adding UV-C light.
Washable pre-filter:
Captures the first dust and allergen particles.
EPA filter / Activated carbon filter:
Captures dust, smoke, pollen and other aller-
gens. Filters odours from the air.
UV-C Light:
Destroys micro-organisms, e.g. germs, viruses,
bacteria, and mould (e.g. mould toxins)
6. Prior to first use
1. Place the device upright on a solid and level
surface. Keep a minimum distance of half a
metre from the device to each wall.
2. To ensure optimum performance of the de-
vice, please ensure that the air inlets and air
outlets are not covered.
3. Inspect the power cord to ensure that it is
not damaged.
4. Connect the power cord to a power outlet.
EN