USER GUIDE ST32BV
6-4 ASSEMBLY OF THE SEAT STIFFENERS.
- 12 –
ASSEMBLY OF THE LOWER END (PIC 1)
1-
Put the seat stiffener lower end (1) in place.
2-
Put the bolt (2) in place and pre-tighten.
For screws and bolts references, refer to the
ST32BV spare parts catalogue
Pict. 1
2
1
ASSEMBLY OF THE UPPER END (PIC 2)
5.
Place the upper end of the stiffener.
6.
Make sure there is no contact with the exhaust
system and with any part of the engine.
If necessary, slightly bend the stiffener.
7.
Drill a 8.5 mm diameter hole in the seat.
8.
Place one screw + conical washer.
9.
Tighten both upper and lower end.
For screws and bolts references, refer to the ST30
/ ST32 spare parts catalogue
FOR OTHER TYPES OF STIFFENERS, PLEASE REFER TO THE ST32BV
SPARE PARTS CATALOGUE OR TO THE ITAKA CATALOGUE
EDITION : JANUARY 2010
MAN038.011
