VERSION : JANUARY 2009
23/26
MAN023.012
MINIKART MANUAL
14.2 BRAKE PADS REPLACEMENT
1.
Remove the brake calliper (1) of
its support (2).
2.
Remove the 4 screws (3) with
springs.
3.
Remove the pads; insert the new
ones (4).
4.
Place the 4 screws (3) with
springs with drop of glue
(Loctite 221 purple, ref:
LU861.002).
5.
Loosen the bolt (5).
6.
Tighten the screw (6) to place
the pads against brake disk.
7.
Then loosen by one and a
quarter of a turn to get the gap
between the pads and the disk.
8.
Tighten the bolt (5).
NOTE:
-
The adjustment of the gap between the disk and the pads is done with the screw (6).
The standard gap is 1mm.
1
4
3
5
6
2
