This document can not be reproduced or released without the Sodikart authorization.
MAN.LPG.EN.00
05/2012
User maintenance guide
7
USE SPArE PArtS of SodiKArt oriGiN
L
PG
9 - Gas carburettor adjustment
9.1 - factory adjustment of the carburettor
16
17
14
15
Legend
14 Screw A
15 Screw B
16 Screw C
On delivery, the carburettor screws must be adjusted as
follows:
● Screw A: Tighten fully and then loosen 3 turns.
● Screw B: Tighten fully and then loosen 5 turns.
● Screw C: Tighten fully and then loosen 0 turns.
9.2 - Gas priming
1
2
6
5
3
Legend
1 reservoir
2 Steam relief valve
3 Carburettor
5 Primer
6 Valve
● Open the valve (6) on the tank (1).
● Press the 'primer' (5) for two seconds.
9.3 - Engine start-up
16
17
14
15
Legend
17 Manual throttle control
● Start the engine and maintain its speed using the
manual throttle control (17).
9.4 - Adjusting the idle
17
14
15
16
Legend
16 Screw C
● Loosen screw C (16) until the engine is running at
maximum speed.
● Release the manual throttle control as soon as
possible.
● Continue to loosen screw C until an acceptable
idling speed of 1600 rpm is obtained.
