page
16
of 24
mod.
JUMBO 13
- man. rev. 00
Manual of SODASTREAM Professional SRL Unipersonale. No reproduction allowed without previous authorization by
the owner.
Replacing external plastic tubes
Warning
: External plastic tubes must be replaced at least once a year
Preliminary checks
In the event of malfunctions, before contacting a specialized technician, check:
that the power cord is correctly inserted
that power is on
that water from the mains is being supplied
that no safety device has triggered (e.g. the water block if installed)
Check of water mains
Check if the tap between the water mains and the water inlet tube is open and if
water comes out of other taps.
If water is available and the water mains works properly, proceed with Check of inlet
water pressure.
If the water mains does not work properly, please have it checked.
Check of inlet water pressure
Warning
It is advisable to check CO
₂
pressure every time there is a change
in inlet water pressure
For further information read the chapter on first installation.
Regulate inlet water pressure between 2 and 3 bars.
CO2 pressure check
Warning
Never exceed the indicated inlet value
For further information read the chapter on first installation.
Check the water manometer, if installed, during the dispensing of cold
sparkling water.
CO
₂
pressure must be regulated at 0.5 bars over the inlet water pressure by
rotating the plastic knob of the reducer.
