The hammer cannot work into the water if its level exceeds the tool stroke (see picture
down under), unless it is specifically made for this purpose.
In case of doubt contact the manufacturer.
Moreover, while the hammer is
working, we advice to shorten the
distance between excavator and
hammer as much as possible and to
remove the cylinder piston rods only
partially (C-D strokes never completely
out).
Make sure that the tool does not slip
from the surface (see picture). If the
tool is placed wrongly or holds weakly
on the material, dangerous
blank
firing
can occur
.
yes
yes
No
No
D
C
YES
NO
USE OF THE HAMMER
15
Page
of 33
4
Nederland B.V.
