14
EN
COUNTIS E03/E04 - 545865A - SOCOMEC
9. CONFIGURATION
The device can be configured directly from the COUNTIS E03/E04 screen in programming mode or via the
communication link. The paragraphs below describe configuring using the screen.
9.1.
On-screen configuration
From the screen, go to programming mode to change your communication settings. How to browse through the
programming mode is described in the following stages:
Function
Where
Buttons
Press
Switch pages within a menu
Every page within a menu
Realtime
Go to SETUP menu
Menu page SETUP
> 3 sec
Change a value/digit
SETUP pages
real-time
Confirm a value/digit
SETUP pages
> 3 sec
Exit SETUP menu
SAVE screen from the SETUP
menu
> 3 sec
Start/stop the displayed partial meter
Partial meter menu
> 3 sec
Reset the displayed partial meter to zero
Partial meter menu
> 3 sec
9 .1 .1 . View all of the menu "SETUP"
In the SETUP menu, press "
" for 3 seconds to put the device into programming mode.
Press "
" to go to the different screens:
>3s
Communication address
Communication speed
Communication parity
Reset partial energy to zero:
Ea+ partial (kWh)
Ea- partial (kWh)
Eap- partial (kWh)
Er+ partial (kWh)
Er- partial (kVarh)
Back to first screen of "SETUP" menu
