12
EN
COUNTIS E00/E02 - 547975A - SOCOMEC
8. CONFIGURATION
The device can be configured directly from the COUNTIS E00/E02 screen in programming mode. The paragraphs below
describe configuring using the screen.
8.1.
On-screen configuration
From the screen, go to programming mode to reset partial energy to zero. How to browse through the programming mode is
described in the following stages:
Function
Where
Buttons
Press
Switch pages within a menu
Every page within a menu
Realtime
Go to SETUP menu
Menu page SETUP
> 3 sec
Exit SETUP menu
SAVE screen from the
SETUP menu
> 3 sec
Start/stop the displayed partial meter
Partial meter menu
> 3 sec
Reset the displayed partial meter to zero
Partial meter menu
> 3 sec
8.1.1. View all of the menu "SETUP"
In the SETUP menu, press "
" for 3 seconds to put the device into programming mode.
Press "
" to go to the different screens:
>3s
Reset partial energy to zero:
Ea+ partial (kWh)
Er+ partial (kWh)
Back to first screen of "SETUP" menu
