72255
78255
45
▪
Operation with a DCC Command Station (
MULTIMAUS
®)
As the (MULTIMAUS
®
) has 20 function keys and a light button, can be especially comfortably operated.
Programming modes:
The locomotive and carriages react to all DCC programming modes.
We recommend:
direct CV programming (byte by byte) or POM mode (programming on main track).
The programming is described in the MULTIMAUS
®
manual.
Reading CVs:
With the appropriate equipment (e.g. / Z21 / z21 / z21start), you can read the value byte by byte and bit by bit.
▪
More Functions
You can find out about a range of other possible set-tings, which are probably very rarely needed, relating to drive speed curve, load control
setting or noise synchronization from the detailed handbook. This can be downloaded as a pdf document MX645P22 from www.zimo.at.
CV29
Bit 0
Direction of Travel
normal switched
normal
switched
normal
switched
normal
switched
Bit 1
Speed Step
14
14
28/128
28/128
14
14
28/128
28/128
Bit 2
Operating Mode
digital
digital
digital
digital
digital digital digital digital
Bit 5
Value
Short address
0
1
2
3
4
5
6
7
Value
Long address
32
33
34
35
36
37
38
39
▪
Combinations for CV29
Summary of Contents for 72254
