©2009 NETCONS, s.r.o.
Page 26 of 27
Features
Appliance control over SMS, by call or manually
Remote restart of appliances
Temperature monitoring
Digital sensors monitoring
Analogue sensor monitoring
Programmable event-driven controller
Alarm detection
Monitoring of sound using integrated microphone
Dimensions
90x53x58mm
Weight
0.1kg netto
Operating temperature
0 to +50 ˚C
Humidity
Max. 80%, non-condensing
Operating temperature
0 to +50 ˚C
Mounting
DIN rail (35mm, EN50022), 3 modules wide
Compliance
CE
6.1
Operation, maintenance and safety recommendations
Do not modify product in any way and do not operate product modified
any way. Warranty is void when product was disassembled or modified
in any way.
Product is not fused; ensure it is installed in fused electric installation
only.
Product is not intended as security device, alarm functions are just
auxiliary.
Product can be operated only indoor office/house environment. Do not
expose it to humid, wet nor chemically aggressive environment.
Product is not designed for industrial operation with aggressive
environment.
Before use, please check, if mobile phones can be used in the area. In
not, please don‟t put product into operation, it can have negative
influence to other electronic systems.
Don‟t expose product to vibrations, shaking or fall downs to avoid
product damage.
When use sound monitoring for taping purposes, ensure you have prior
permission to do it from affected people.
Load current 10A/0.1A is valid for resistive load. If you need to switch
an non-resistive or higher current load, use an external contactor rated
for target load among the product. Switching a non-resistive load or
higher than nominal rating currents can cause permanent damage of
switching elements, which is not covered by warranty.
