Rev1.0 2015 Nov
First, install the converter onto a carrier supplied with the chassis:
Step 1- Unscrew the carrier from the desired expansion slot on
the chassis.
Step 2- Remove the screw on the converter as shown below.
Step 3- Fit the converter onto the carrier and use the screw to secure it.
Installing in a Chassis
The Converter can be fit into any of the expansion slots on a special
designed chassis.
Unscrew and pull out the media converter board
Monitoring the Converter through Management Module
There is a management module that can control this media
converter through the chassis system, this media converter can
be controlled through Web Browser, SNMP and terminal emulation
program.
The management module will detect the default reset on the DIP
switches and display out the status in the first time, then the status will
according to the management module that can control the function
through the chassis system.
Summary of Contents for EM210 series
Page 1: ...Rev 1 0 2015 June EM210 series Fast Ethernet Media Converter Quick Installation Guide EM210...
Page 7: ...1 0 2015 11 1 32 104 0 40 2 90 3 RFC IEC 801 3 Level 2 3V M 4 5 1 8 1 2 AC DC 5V 1A AC 1 2 3...
Page 10: ...29072466EM210 0 SOARNEX Technology Corp support soarnex com http www soarnex com...
