Snuza Video, Instruction Manual

Page: 14 / 52

14
7. CARE AND MAINTENANCE
• Keep all parts and accessories out of children’s reach.
• Fingerprints or dirt on the lens surface can adversely affect camera performances.
Avoid touching the lens surface with your fingers.
• Should the lens become dirty, use a blower to blow off dirt and dust, or a soft, dry cloth to
wipe off the lens.
• Keep the camera dry. Precipitation, humidity and other liquids contain minerals that will
corrode electronic circuits.
• Do not use or store in dusty, dirty areas.
• Do not store in hot areas. High temperatures can shorten the life of electronic devices
and warp or melt certain plastics.
• Make sure the camera and the monitor are turned on.
• Make sure the power plugs are pushed all the way in.
• If the camera/monitor is powered by battery, replace all batteries with new ones.
• If there is a microwave oven in use between the camera and the monitor, remove the
microwave oven or turn it off, or reposition the monitor.
• Make sure the camera and the monitor are within range of each other (range is
approximately 450 feet/150 metres in a clear line of sight.
• If the power LED is on but only voice signal input is detected, the monitor may be in voice-
activated mode. Press the Auto button to turn on the screen.
6. TROUBLESHOOTING
If you don’t get any signal at all:-
If the signal is poor, or there is interference:-
EN
G
LI
S
H
If the message ”OUT OF RANGE” displays on the monitor
(parent unit):-
If the serial numbers of the camera and monitor do not match, they need to be ’paired’.
Non-matching pairs will display the message ”OUT OF RANGE” on the monitor until they
are paired. Press and hold both the night light button on the camera simultaneously with the
VOX button on the monitor, and hold for approximately 5 seconds until the monitor starts
displaying the image transmitted from the camera. This should only need to be done once at
setup.