ASSEMBLING
18
ASSEMBLING
HAZARD due to incorrect assembly
Electric shock HAZARD
−
If you need to drill: make sure that there are no pipes or piping at
the drilling site.
max. 30 cm
1. Attach a latch hook or U-profile piece
with sufficient strength to the ceiling.
Latch hooks must only have a small
opening so that the hanging nest
cannot slip out of the latch hook during
later use.
If you wish to use an already existing
suspension device, check that it has
sufficient load capacity.
2. Hang up the hanging nest.
3. Check that the hanging nest is really
safe and has sufficient load capacity.
4. Check the distance to the floor.
Pay attention to the following:
The above figure shows an attachment option. Other attachment options are
possible, for example, with a chain instead of a rope.
Never hang up the hanging nest without the hook with swivel. It prevents
twisting of the suspended hanging nest.
