ASSEMBLY INSTRUCTIONS - BEFORE YOU START
17
ASSEMBLY INSTRUCTIONS - BEFORE YOU START
The assembly or suspension of the hanging nest must be carried out by
an adult. Keep children away from the assembly area. The assembly or
suspension carried out unprofessionally may cause a risk of serious injury.
Before assembly, make sure that the ceiling has the required load capacity.
This also applies to the corresponding parts or fasteners (ceiling latch hooks
and, for example, a rope or chain). Seek advice from your specialist dealer, if
necessary.
If you need to drill: before drilling, check the surface for piping.
Check that the planned location is really suitable. At the planned location,
check that ...
... the ceiling has sufficient load capacity,
... there are no obstacles around: minimum distance is 1 metre,
... no doors protrude into the area of the hanging nest when opening,
... the ground under the hanging nest is ideally “soft”, for example a carpet.
In most cases, you also need a suitable rope or chain with sufficient load
capacity (min. 80 kg) depending on the ceiling height.
Assembly material such as screws, dowels, rope or chain are not included.
PUMPING UP THE SEAT CUSHION
1. Turn the seat inside out and open the zip.
2. Place the seat cushion in the fabric cover with the valve in the front and pump
it up with a pump or your breathing air.
3. Close the zip and turn the seat back to normal.
En
glis
h
