6
platypus activity chair
Adjusting the position of the Tilt/Rocking Base heads and tails
The Tilt/Rocking Base can be configured to accommodate multiple positioning needs.
Changing the configuration of the Tilt/Rocking Base is accomplished by changing the
position of the heads and tails.
A simple pin (a) locks the heads and tails into four different positions on the base. See
figure 6.
The heads and tails both move as a pair. The pins must be removed from both heads and
both tails before they can be moved. It is important all four pins are re-inserted after the
change.
Tilt/Rocking Base Configurations
(a)
Pin Positions – See Figure 7
Head Tail
Anterior Tilt 2
4
Posterior Tilt 4
2
Full Rocking 1
1
Limited Rock 2
2
No Rock
3
3
Figure 6
Figure 7
