5
platypus activity chair
Mount the Platypus Activity Chair onto the Tilt/Rocking Base
Place the Platypus Activity Chair on the Tilt/Rocking Base as shown in figure 5 below. The
feet of the Platypus and the feet of the Tilt/Rocking Base should align and touch.
Turn the locking key until the paddles are in the chair lock position as shown on the
previous page (figure 2).
Ensure the locking key drops down and locks itself against accidental release – if necessary,
push the key downwards to fully engage lock. After locking the chair attempt to lift it from
the base. The chair should remain locked to the base.
Warning – Failure to ensure the seat is properly secured could
result in the chair disengaging from the tilt/rocking base resulting in
occupant injury or death.
NOTE: Remember the key must be lifted up approximately ½” before it can be turned to
release the chair. Please see figure 4 on preceding page.
Figure 5
