Operation
A. Getting Started
Turn the instrument on by pressing the power switch on.
The display will down count from
999999 . . .
while the unit is being updated.
Allow the unit to warm-up for 30 minutes.
C. HI / LO Checkweigh functions
1. Use the , and keys to change the OVER / UNDER limit settings.
2. The key can be select display or
for setting OVER and UNDER limit and return to normal weighing mode.
3. In normal weighing mode, press to select
HI / LO Checkweigh mode
.
If the weight is higher than OVER limit, the HI lamp lights on in
yellow
color
and beep sounds as you setted.
If the weight is between OVER and UNDER limit, the GO lamp lights on in
green
color
and beep sounds as you setted.
If the weight is lower than UNDER limit, the LO lamp lights on in
red
color
and beep sounds as you setted.
4. The key can be used to delete all datas in HI/LO setting mode.
B. Taring (zeroing)
All models have taring (zeroing) capabilities up to their total weight capacity.
To weigh a sample in its container with the display showing the weight of the sample
use the following ZERO (tare) procedure.
1. Place sample container on pan and then press the key and NET lamp lights.
2. Now place sample in its container.
3. When the scale is stable, the display shows the weight of the sample.
D. Accumulation function
1. Press key can be accumulating the sub-total weight one time.
The next accumulation must be return to zero and got new weight.
The display will be shows the times of accumulation promptly,
2. Press key can be show the total times promptly,
4. The key can be used to delete all datas in
grand-total
mode,
Function keys
Function key. Used for toggle switch between
display weight, check-weigh or total accumulation.
Units switch.
Captures a new center of zero.
Reduce gross weight on pan as tare weight.
Setting OVER and UNDER limit.
a. The
M+
to be used when accumulating the sub-total data.
b. The
<
to be a function of moves the flashing cursor
digit to the left.
a. The options.
b. The to be a function of increases the flashing cursor
by one digit.
*
<
Turns instrument
On
or
Off
.
On/Off Switch
Used for parts counting.
and return to normal weight display.
and then shows
grand-total.
3. The key can be used to review total times in
grand-total
mode.
and return to normal weight display.
3
4