Snowrex NV-1.5 Operation Manual Download Page 3

Programme

Press and hold any key while powering 

ON

. The display will shows 

Press          key goes to 

programme sequence

Press          key for 

parameter selecting

 and  

Press          key for 

setting and goes to next step

. The programme sequence as follows: 

B.  Auto power off 

C.  Backlit 

D.  Beep sounds 

      setting for HI  

E.  Beep sounds 

      setting for LO 

None  

  5 minutes after 

10 minutes after 

20 minutes after 

30 minutes after 

 

Auto lighting while loading 

Active 

 

None 

Short sounds bi.bi.bi.... 

Long sounds bi--bi--bi-- 

 None 

Short sounds bi.bi.bi.... 

Long sounds bi--bi--bi-- 

Specifications

Preparation

Model              NV-1.5  NV-3  NV-7.5  NV-15  NV-30  NHV-1.5  NHV-3  NHV-6  NHV-15  NHV-30   

Range

Readability

Pan size

                                                   265  x 205  mm

Net Weight                                                 

  4 kg  

Power

                                        9V/500mA, AC adapter included. 

This product is intended for indoor use.

*  Select a suitable work area.

*  Work area should be relatively free from drafts and vibrations.

 *  Work surface should be level and rigid.

*  Do not locate near magnetic materials or equipment/instruments which use magnets in 

 their design.

   operation and accuracy.

Installation

 Remove instrument and accessories from the carton. 

 Save packing material for transportation purposes.

*  If using the AC adapter, insert power cord into the receptacle located on the side panel 

   of the instrument (behind On/Off switch). Firmly push in the plug.

*  Allow the instrument to warm up for 30 minutes prior to use.

*  Your instrument features a numeric display that continuously shows your weighing results.

*  Avoid areas which have variations in room temperatures or have excessive room 

Dimensions

                             ( L x W x H )  320 x 275 x 110  mm 

None  

E.  Counting Function

    

a.

  Count the desired amount sample pieces (10, 20, 50, 100, or 200 total pieces )

    

b.

  Press the          to display total count numbers of 10, 20, 50, 100, or 200.

         This number will cycle, press the          again to select sample size once 

         it is displayed. The arrow at the bottom of the display will point to      .

    

c.

  You are now ready to perform parts counting of those specific pieces.

         Press the          for the total weight. Repeat step 

a

 through 

c

 for each type of 

piece to be counted.

and place on the pan.

Operation

A.  Auto zero tracking 

None  

  1 digit 

2 digits 

1.5kg     3kg    7.5kg    15kg     30kg       1.5kg       3kg       6kg      15kg        30kg

0.1g    0.2g      0.5g        1g         2g       0.05g      0.1g      0.2g       0.5g           1g

temperatures. Room temperatures above 40    or below 0    could be affect

2

5

Reviews: