4
7
Operation
Your new balance weighs in different units and can perform parts counting and percent
of weight functions.
A. Taring ( Zeroing )
All models have taring ( zeroing ) capabilities up to their total weight capacity.
To weigh a sample in it's container with the display showing the weight of the
1.
Place sample container on pan and then press the .
2.
Now place sample in it's container.
3.
When the balance is stable, the display shows the weight of the sample.
B. Counting Function
1.
Count the desired amount sample pieces (10, 20, 50, 100, or 200 total pieces )
and place on the pan.
2.
Press the to display total count numbers of 10, 20, 50, 100, or 200.
This number will cycle, press the again to select sample size once
it is displayed. And an icon " " will be displayed.
3.
You are now ready to perform parts counting of those specific pieces.
Press the for the total weight.
Repeat step
1
through
3
for each type of piece to be counted.
C. Percentage Function
1.
Count the desired sample pieces and place on the pan, press the .
2.
When the display shows " 100.0 ", and an icon " " will be displayed.
3.
Press the If you want to know total weight, press the .
sample use the following Tare procedure.
SAMPLE
MODE
TARE
SAMPLE
SAMPLE
SAMPLE
MODE
%
Programme
Press key repeatedly to cycle through different weigh modes available.
Press key for
parameter selecting.
When desired mode appears,
Press key for
setting.
The programme sequence as follows:
Press and hold any key and then press , and display shows
On/ZERO
MODE
MODE
TARE
A. Weighing Units
B. Auto zero
C. Sleep mode
Off
5 minutes after
10 minutes after
20 minutes after
30 minutes after
D. Backlit
Off
: Disable
: Enable
Gram
Tael(HK)
Oz(av)
Troy oz
Penny weight
Carat
Grain
Tola(Anna)
+/- 1d
+/- 2d
g
lb
oz
ozt
tl
tl
H
dwt
GN
ct
mm
Pound(av)
Tael(TW)
Tael(HK-Jewelry)
Tola(Masha)
tl
A
tl
M
tl
J
H
Momme
g
GN
ct
dwt
mm
lb
oz
tl
J
H
M
A
g
GN
ct
dwt
mm
lb
oz
tl
J
H
M
A
Auto lighting while loading.
Active lighting
Off
Auto lighting when the weight
value changed or any key
operation is done.
Auto turn off when the weight
data becomes and stays
stable for some moment.