8
3.
Push the power cable into the cable guide located on the
plastic cross plate (Fig. 4).
4.
Position the upper handle assembly onto the motor
housing assembly aligning the holes (Fig. 5).
3.
Secure the upper handle to the lower handle using the
knobs and bolts. Tighten the knobs on each side to ensure
a secure fit (Fig. 6).
4.
Secure the power cable to the unit body by using the
cable clips. Use one clip above the plastic cross plate and
the second below the plastic cross plate (Fig. 7).
m
WARNING!
Make sure all handle knobs are properly
tightened before using the electric cultivator.
Fig. 3
Back View
Screws
Fig. 4
Cable guide
Plastic cross plate
Fig. 5
Upper
handle
Motor
housing
assembly
Fig. 6
Upper
handle
Lower
handle
Knob + bolt
Fig. 7
Cable clip
Cable clip
Power cable
Plastic
cross
plate
Summary of Contents for SUNJOE TJ600E-RM
Page 16: ...snowjoe com...
