background image

15

If you cannot find the cause of the problem or are uncertain 

what to do, have the saw inspected by an authorized  

Snow Joe

®

 + Sun Joe

®

 dealer or call the Snow Joe

®

 +  

Sun Joe

®

 customer service center at 1-866-SNOWJOE  

(1-866-766-9563) before using it.

m

CAUTION!

•  Remove the power cord and wait at least five minutes for 

the saw to cool before servicing or storing your unit.

• 

If you drop the saw, carefully inspect it for damage. If the 

guide bar is bent, the housing is cracked, the handle is 

broken, or if you see any other condition that may affect 

the saw’s operation, DO NOT USE the tool. Instead, have 

it serviced at an authorized Snow Joe

®

 + Sun Joe

®

  

dealer or call the Snow Joe

®

 + Sun Joe

®

 customer service 

center at 1-866-SNOWJOE (1-866-766-9563).

Cleaning

Use only mild soap and a damp cloth to clean the pole chain 

saw. Never let any liquid get inside the motor housing and 

NEVER immerse any part of the saw housing in liquid.

Storage

•  Ensure that the guide bar cover is in place when storing 

and transporting.

•  Do not store the pole chain saw near chemicals, such 

as fertilizers or other harsh solvents. Do not expose 

the plastic parts of the unit to brake fluids, gasoline, 

petroleum-based products, penetrating oils, or the like. 

These products are often highly corrosive and may cause 

permanent damage, weaken, or destroy the plastic parts 

of your pole chain saw.

• 

When not in use, your electric pole chain saw should be 

stored indoors in a dry and high or locked-up place, out of 

the reach of children.

Support

If your Sun Joe

®

 SWJ801E electric pole chain saw requires 

service or maintenance, please call 1-866-SNOWJOE  

(1-866-766-9563) for assistance.

Model and Serial Numbers 

When contacting the company, reordering parts, or arranging 

service from an authorized dealer, you will need to provide the 

model and serial numbers, which can be found on the decal 

located on the housing of the unit. Copy these numbers into 

the space provided below.

Record the following numbers from the housing or handle of 

your new product:

Model #:

Serial #:

S  W   J   8    0   1   E 

Summary of Contents for Sunjoe SWJ801E





















Reviews: